24 VDC swing-gate automation kit based on two HYRON 300 telescopic actuators. Aluminium housings, stainless-steel rods and a built-in manual-release mechanism provide a practical installation for residential or commercial gates. Each actuator has a 400 mm stroke. Gate suitability depends on the combination of leaf length, weight and installation geometry; the maximum length and maximum weight must not be applied simultaneously.
Technical specifications
| Motor supply | 24 VDC |
|---|---|
| Power consumption | 110 W |
| Current consumption | 5 A |
| Maximum thrust | 2000 N |
| Nominal thrust | 600 N |
| Stroke | 400 mm |
| No-load speed | 22 mm/s |
| 90° opening time | Up to 11.5 s at full load, per manufacturer data |
| Duty | Intensive use |
| Maximum leaf length | 3 m, subject to the manufacturer load/length chart |
| Maximum leaf weight | 500 kg only within the permitted leaf-length range; not at maximum leaf length |
| Protection rating | IP44 |
| Insulation class | II |
| Operating temperature | −20°C to +50°C |
| Actuator weight | 7.8 kg |
Kit contents
- 2 × HYRON 300 24 VDC actuators
- 1 × QUAD 24V HP control unit with radio receiver
- 2 × VICTOR rolling-code transmitters
- 1 × pair of DART photocells
- 1 × SWIFT flashing beacon
- Mounting hardware and safety signage



