Belt-drive garage-door automation kit built around the white RAMPART 1000 24 VDC actuator. An integrated controller and radio receiver simplify the installation, while the encoder monitors travel and obstacle detection. Soft starting and stopping reduce abrupt movement. The actuator is intended for appropriately balanced sectional or overhead garage doors, within the stated operating limits.
Technical specifications
| Motor voltage | 24 VDC |
|---|---|
| Mains supply | 230 VAC ±10%, 50 Hz |
| Maximum pulling force | 1000 N |
| Nominal pulling force | 300 N |
| Maximum door weight | 210 kg |
| Maximum opening speed | 0.14 m/s |
| Maximum continuous motor run | 60 s; intermittent operation |
| Power consumption | 150 W |
| Radio receiver | 433.92 MHz, dynamic code; up to 200 transmitters |
| Protection rating | IP20 |
| Insulation class | II |
| Operating temperature | −20°C to +50°C |
| Drive | Belt guide |
| Colour | White |
Kit contents
- 1 × RAMPART 1000 white actuator
- 1 × belt guide
- 2 × radio transmitters
- Mounting hardware
- Safety signage plate
